 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EM19100 EM19100 8-BIT 20 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) MSPS VIDEO A/D CONVERTER (CMOS) GENERAL DESCRIPTION EM19100 is an 8-bit CMOS A/D converter for video use. The adoption of a 2-step parallel system achieves low consumption at a maximum conversion speed of 20 MSPS typical. FEATURES * * * * * * * 20MSPS maximum conversion speed Build-in sampling and hold circuit Internal self-bias reference voltage 90mW power dissipation at 20MSPS +5V single power supply Available in 24 pin SOP Series EM19100M for 300 mil SOP EM19100S for 209 mil SOP APPLICATION TV,VCR digital systems and a wide range of fields where high speed A/D conversion is required. PIN ASSIGNMENT EM19100 OE DVSS D0 D1 D2 D3 D4 D5 D6 D7 DVDD CLK 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 DVSS VRB VRBS AVSS AVSS VIN AVDD VRT VRTS AVDD AVDD DVDD FUNCTIONAL BLOCK DIAGRAM /O E DVS S D0 1 Reference voltage 24 23 22 DV S S 2 3 VRB V RBS D1 D2 4 Lower data latches 5 Lower encoder (4bit) Lower Comparators with S/ H (4bit) 21 AVSS 20 19 AVSS VI N AV DD D3 D4 6 Lower encoder (4bit) 7 8 Upper data latches Lower Comparators with S/ H (4bit) 18 17 D5 D6 V RT V RT S 9 Upper encoder (4bit) 10 D7 Upper Comparators with S/ H (4bit) 16 15 14 AV DD DV DD 1 1 CL K 1 2 Clock generator AV DD DV DD 13 * This specification are subject to be changed without notice. 1.26.1996 1 EM19100 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) OUTPUT CODING Step 0 1 2 .... 124 125 .... 254 255 Analog Input (V) 0.607815 0.607815~0.6156250 0.6156250~0.6234375 .... 1.6000000~1.6078125 1.6078125~1.6156250 .... 2.5843750~2.5921875 2.5921875~ Digital Output Code 00000000 00000001 00000010 .... 10000000 10000001 .... 11111110 11111111 Conditions VRB=0.6V VRT=2.6V 1LSB=7.8125mV Clock Analog input N N+1 N+2 N+ 3 N+ 4 Data output N-3 N- 2 N- 1 N N+ 1 ABSOLUTE MAXIMUM RATINGS (TA=25C) Items Supply voltage Operating temperature Input voltage Ref, Input voltage Sym. VDD TOPR VIN VRT,VRB Rating 7 -20 to +65 VSS to VDD VSS to VDD Unit V C V V (FC=20MPS,VDD=5V,VRB=0.5V,VRT=2.5V,Ta=25 deg.) Parameter Sym. Conditions Maximum Conversion Speed FC Vin=0.6V to 2.6V fin=1kHz ramp Supply current IDD FC=20MSPS NTSC ramp wave input Reference pin current IREF Analog input bandwidth BW VIN=1.5V+0.07Vrms Analog input capacitance CIN Reference resistance RREF Internal bias VRB Short VRB and VRBS VRT-VRB Short VRT and VRTS Offset Voltage EOT EOB Digital input voltage VIH VIL Digital input current IIH VDD=max. VIH=VDD IIL VIL=0V * This specification are subject to be changed without notice. Min. Typ. Max. 20 12 17 5.7 8.0 9.1 10 11 220 250 350 0.55 0.6 0.65 1.9 2.0 2.1 -10 -35 -60 0 15 45 4.0 1.0 5 5 Unit MSPS mA mA MHz pF V mV V uA 1.26.1996 2 EM19100 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) Parameter Digital output current Digital output current Output data delay Integral nonlinearity Differential nonlinearity Differential gain error Differential phase error Aperture jitter Sampling delay Sym. IOH IOL IOZH TDL EL ED DG DP tAJ tDS Conditions OE=VSS,VOH=VDD-0.5V VDD=min. VOL=0.4V OE=VDD, VOH=VDD VOL=0V FC=20MSPS VIN=0.6V to 2.6V FC=20MSPS VIN=0.6V to 2.6V NTSC 40 IRE mod ramp, FC=14.3MSPS Min. Typ. Max. Unit -1.1 mA 3.7 16 uA 16 18 30 ns 0.5 1.3 LSB 0.3 0.5 LSB 1.0 0.5 30 4 % deg ps ns Timing Vi(1) Vi(2) Vi(3) Vi(4) Analog input External clock Upper comparators block S(1) C( 1) S(2) C( 2) S(3) C( 3) S(4) C( 4) Upper data MD(0) MD(1) MD (2 ) MD(3) Lower reference voltage RV( 0) RV(1) RV(2) RV( 3) Lower comparators A block S(1) H( 1) C(1) S(3) H(3) C( 3) Lower data A LD (-1) L D(1 ) Lower comparators B block H( 0) C (0 ) S (2 ) H (2 ) C (2 ) S (4 ) H (4 ) Lower data B LD(-2) LD( 0) LD(2) Digital output OUT( -2) OUT( -1) OU T (0 ) OUT( 1) * This specification are subject to be changed without notice. 1.26.1996 3 EM19100 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) Timing explanation EM19100 is a 2-step parallel system A/D converter featuring a 4-bit upper comparators group and 2 lower comparators groups of 4-bit each. The reference voltage that is equal to the voltage between VRT-VRB/16 is constantly applied to the upper 4-bit comparator block. Voltage that corresponded to the upper data is fed through the reference supply to the lower data. VRTS and VRBS pins serve for the self generation of VRT (Reference voltage top) and VRB(Reference voltage bottom). This IC uses an offset cancel type comparator and operates synchronously with an external clock. It features the following operating modes which are respectively indicated on the timing chart with S, H, C symbols. That is input sampling (auto zero) mode, input hold mode and comparison mode. The operation of respective parts is as indicated in the chart. For instance input voltage Vi(1) is sampled with the falling edge of the first clock by means of the upper comparator block and the lower comparator A block. The upper comparators block finalizes comparison data MD(1) with the rising edge of the first clock. Simultaneously the reference supply generates the lower reference voltage RV(1) that corresponded to the upper results. The lower comparator block finalizes comparison data LD(1) with the rising edge of the second clock. MD(1) and LD(1) are combined and output as Out(1) with the rising edge the 3rd clock. Accordingly there is a 2.5 clock delay from the analog input sampling point to the digital data output. Application Note VDD,VSS To reduce noise effects, separate the analog and digital systems close to the device. For both the digital and analog VDD pins, use a ceramic capacitor of about 0.1uF set as close as possible to the pin to bypass to the respective GND's. Analog input Compared with the flash type A/D converter, the input capacitance of the analog input is rather small. However it is necessary to conduct the drive with an amplifier featuring sufficient band and drive capability. When driving with an amplifier of low output impedance, parasite oscillation may occur. That may be prevented by inserting a resistance of about 100 in series between the amplifier output and A/D input. Clock input The clock line wiring should be as short as possible also, to avoid any interference with other signals, separate it from other circuits Reference input Voltage between VRT to VRB is compatible with the dynamic range of the analog input. Bypassing VRT and VRB pins to GND, by means of a capacitor about 0.1F, stable characteristics are obtained. By shorting VRT and VRTS, VRB and VRBS, the self bias function that generates VRT=2.6V and VRB=0.6V, is activated. Timing Analog input is sampled with the falling edge of CLK and output as digital data with a delay of 2.5 clocks and * This specification are subject to be changed without notice. 1.26.1996 4 EM19100 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) with the following rising edge. The delay from the clock rising edge to the data output is about 18ns. OE pin By connecting OE to GND output mode is obtained. By connecting to VDD high impedance is obtained. About latch up It is necessary that AVDD and DVDD pins be the common source of power supply. This is to avoid latch up due to the voltage difference between AVDD and DVDD pins when power is ON. * This specification are subject to be changed without notice. 1.26.1996 5 EM19100 8-BIT 20 MSPS VIDEO A/D CONVERTER (CMOS) Application Circuit U2 U2 U3 * This specification are subject to be changed without notice. 1.26.1996 6 |
Price & Availability of EM19100M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |